To enable the high pressures airflow with a power specification
matching to operation for every requirement.
High efficiency with special impeller design.
​Available with intake on both sides.

To enable the high pressure airflow at the Pneumafil line
which is available with intake on one side. High efficiency
with special impeller design. 

General Usage: Pneumafile transportation 
Max. Capacity : 3000 Pa & 18000 m³\h 

Rotary filter is a system element that
filters dust and fibres in the air. that is 
collected from the hall and machine 
exhausts. 

Diameters: 02000 mm, 02500 mm,
03000 mm, 03500 mm 

170cm, 340cm, 510cm, 680cm in Ieng 

Electrostatic Powder Paint Co ted
to prevent corrosion. 

8mm, %100 Acrylic, 360-460 gr/m·
Easy to CLEAN Filter Media Cover. 

Especially designed Double Section
Nozzle with SUPERB Performance. 

To separate and clean dust and waste. With 80-150kg/h
waste capacity. Brush and brushless screw
​design with respect to waste material.

With Temsan Pressure Switch Control
for high efficieny and energy saving.
Maximum 250kg/h waste capacity. 

To transport cotton and synthetic fibers in the form
of tuft with high efficiency.

Air Volume: 4500-7500 m³/h
Max. Capacity: 1200 kg/h

To collect dust particles from dust
room and compressed by the means of screw with gearbox.

Working with Automation and Perfect
​cleaning with micro filter (without labor cost)

Using conveyor system instead of labors for long
distances to decrease high cost and power consumption
at the single type of waste. Also using
​for mixing of different type of waste.

To separate the waste and in textile plant.
Prefabricated Filter Unit in galvanized sheet
metal for applications without civil work
and costs.

With Temsan Pressure Switch Control for
safety control.

Optimum humidifying cell design for accurate humidity
control with separator and eliminator. Stainless steel
(304 SS quality-1,5&2,5mm) washer
​tank design for packet type AC.

Suitable to convey dust, fibres, waste in textile,
plastic and paper industrywith the different impeller
​options like Steel and Aluminum in the high efficiency.

Maximum Capacity: 2500-12500 m³\h
Pressure up to 3500 Pa

These types of fan are giving to specialize for
machinery which is need different
​pressure and air flow capacity.

To enable the high pressure airflow at the
Comber line and avaible with intake
on the side. High efficiency with special
impeller design.

Max. Capacity: 2000 Pa & 23000 m³\h

Standard Doors 1,5mm steel sheet double
walled, with heatinsulation and electrostatic powder paint coated.

Pressurized Room Doors 1,5mm steel sheet double walled,
with heat insulation, electrostatic powder
coated and pressure gasket.

SS Doors 1,5mm stainless steel (304 Quality)
​sheet double walled, with heat insulation.

Outer frame made by aluminum, diffusers
galvanized sheet metals, adjustable from
two points for air volume and direction. 

Designed to supply and circulate air evenly with
highest flow efficiency. For the
homogeneous air distribution, adjustable system,
​plate made of galvanized sheet.

With Pneumatic actuator and cylinder.
This type sliding damper is used in the waste
collection systems to shut off a
​line and control the waste flow.

These machines that allow the fabric which are
coming out of weaving looms to be wrapped in
a manner that is compatible with the machine
speed without curling the edges. 

The diameter sizes are various and desired size
can be chosen. (max 1500 mm). 

Rolls of chosen diameters are covered with
abrasion resistant, less rough rubber band. 

Winding tension is detected by dense arms and
winding speed is detected electronically.

Doors can be opened to 180 degrees,
RAL 7035w airing filter, electrostatic
powder paint coated, 2mm sheet
thickness. Mounting plate was made by
lmm hot deep galvanized sheet. 

Air Circulation with filtering. Front and
back frames are welded & other parts
are fitted with nuts and bolts. 

Cooling fan system.